Open a web browser like internet explorer or Netscape. Enter the ip address of your router in the address bar of your browser. In the picture above the address bar has http://www.google.com in it. Just replace all of that with the ip address of your router. By default the ip address should be set to 192.168.0.1.
You should see a box prompting you for your username and password. Enter your username and password now. By default the username is admin, and the password is blank. Click the Ok button to log in to your router.
Please visit our default username and passsword page, if the username and password shown above did not work for you.
Click the Advanced link near the top of the page.
Put a checkmark in the Enable checkbox. Enter the name of the program into the Name box. It doesn't really matter what you put into this box, but something that will remind you why these ports are being forwarded would be a good idea. Use the Computer Name box to choose a computer to forward ports to. This box contains a list of computer names that are visible on your network. If you are forwarding a single port, enter that port number into both of the Public Port and both of the Private Port boxes. If you are forwarding a range of ports, enter the lowest number of that range into the left hand Public Port and Private Port boxes. Then enter the highest number of that range into the right hand Public Port and Private Port boxes. Use the Traffic Type drop down box to select the protocol type of the ports you are forwarding.
When you're finished, click Save Settings near the top of the screen to save your changes.
And that's it! You're done!
0 comments:
Post a Comment